Tons of patterns & options! Contact us if you’d like to make a special request or custom pattern! Patterned Adhesive Craft vinyl (transfer tape NOT included) easy application instructions providedProfessionally Printed Pattern Vinyl Craft Vinyl – Decal High-quality pattern vinyl2 Options to choose from: Patterned Oracal 651 Glossy Permanent Adhesive Craft Vinyl Reusable No Residue Removable Adhesive VinylBundle discounts available!Cut out any shape or design & apply!Take advantage of our huge selection of patterns & colors!Please be sure to check out the easy application instructions below!All you need is a plotter or cutter! Iron for HTV All Patterns are printed with a large format Roland printer that uses Eco-solvent genuine inks.Permanent Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Printable Oracal 651 – No Transfer Tape ProvidedGreat to use on glass, metal, plastic, and much more! Please clean surface before use!Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceWeatherproof / 4+ years durabilityReusable No Residue Non-Slip Removable Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Apply, Remove & Apply Again! No Residue when peeling! Comparable to 3M – No Transfer Tape ProvidedGreat to use on glass, metal, plastic, and much more! Please clean surface before use!Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceWeatherproof / 7+ years durability CUTTER SETTINGSCricut: Blade: Standard Setting: VinylSilhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/sGraphtec: Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/sMH, SC2, LP3, & Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing VariesTitan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing VariesSettings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONSApplication Instructions (Permanent) Cut on Pattern Side and DO NOT MIRRORAfter weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceSurface must be clean and dry (best on smooth hard surfaces)Application Instructions (Reusable) Cut on Pattern Side and DO NOT MIRRORAfter weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceSurface must be clean and dry (MUST apply on smooth hard surfaces) apply, remove & reuse SIZE AND HOW TO APPLY1) Cut on pattern (Do not mirror)2) Weed excess vinyl 3) Clean Surface (Must be dry)4) Apply and peel mask
Read moreTartan Plaid Pattern HTV Siser & Adhesive Craft Vinyl Oracal FREE SHIPPING $20+ 1 semana ago
Available in heat transfer vinyl HTV, permanent adhesive (sign) craft vinyl & reusable, no residue, removable adhesive vinyl & decal Tons of patterns & options! Contact us if you’d like to make a special request or custom pattern! Professionally Printed Pattern Vinyl for HTV – Craft Vinyl – Decal High-quality pattern vinyl3 Options to choose from: Siser Colorprint Easy Iron On Heat Transfer Vinyl Patterned Oracal 651 Glossy Permanent Adhesive Craft Vinyl Reusable No Residue Removable Adhesive VinylBundle discounts available!Cut out any shape or design & apply!Take advantage of our huge selection of patterns & colors!Please be sure to check out the easy application instructions below!All you need is a plotter or cutter! Iron for HTV All Patterns are printed with a large format Roland printer that uses Eco-solvent genuine inks.Permanent Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Printable Oracal 651 – No Transfer Tape ProvidedGreat to use on glass, metal, plastic, and much more! Please clean surface before use!Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceWeatherproof / 4+ years durabilityReusable No Residue Non-Slip Removable Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Apply, Remove & Apply Again! No Residue when peeling! Comparable to 3M – No Transfer Tape ProvidedGreat to use on glass, metal, plastic, and much more! Please clean surface before use!Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceWeatherproof / 7+ years durabilityIron on Heat Transfer Vinyl – For Any Garment or Fabric Printed on Siser ColorPrint Easy (TTD High-Tack Mask Provided)Heat Transfer is printed without the carrier. Siser TTD Easy Mask is provided for applicationCut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply TTD Easy Mask to transfer design off of the backing and place on your garment face upCan be applied with a home iron and/or heat press CUTTER SETTINGSCricut: Blade: Standard Setting: Iron OnSilhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/sGraphtec: Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/sMH, SC2, LP3, & Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing VariesTitan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing VariesSettings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONSApplication Instructions (home iron) Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 15 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier hot or coldApplication Instructions (heat press) Cut material – don’t mirror! Weed excess material Mask with TTD High Tack Mask Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds Peel carrier hot or cold Cover and reheat for 2-3 seconds RECOMMENDED ACCESSORIES & CAREPatterned Vinyls Apply to: 100% cotton Poly/cotton blends 100% polyester Leather Lycra®/spandexRecommended Accessories: Weeder/Tweezers Laundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean Do not bleach SIZE AND HOW TO APPLY1) Do not mirror 2) Cut on pattern 3) Weed excess vinyl 4) Apply and peel mask 5) Press 1) Do not mirror 2) Cut on pattern 3) Weed excess vinyl 4) Apply and peel mask CUSTOM PATTERNS AND DESIGNSHave your own patterns you want to print? Contact us today!
Read moreMarble Craft Vinyl Oracal 651 Ombre Pattern Adhesive Vinyl | FREE SHIPPING 1 semana ago
Tons of patterns & options! Contact us if you’d like to make a special request or custom pattern! Patterned Adhesive Craft vinyl (transfer tape NOT included) easy application instructions providedProfessionally Printed Pattern Vinyl Craft Vinyl – Decal High-quality pattern vinyl2 Options to choose from: Patterned Oracal 651 Glossy Permanent Adhesive Craft Vinyl Reusable No Residue Removable Adhesive VinylBundle discounts available!Cut out any shape or design & apply!Take advantage of our huge selection of patterns & colors!Please be sure to check out the easy application instructions below!All you need is a plotter or cutter! Iron for HTV All Patterns are printed with a large format Roland printer that uses Eco-solvent genuine inks.Permanent Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Printable Oracal 651 – No Transfer Tape ProvidedGreat to use on glass, metal, plastic, and much more! Please clean surface before use!Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceWeatherproof / 4+ years durabilityReusable No Residue Non-Slip Removable Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Apply, Remove & Apply Again! No Residue when peeling! Comparable to 3M – No Transfer Tape ProvidedGreat to use on glass, metal, plastic, and much more! Please clean surface before use!Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceWeatherproof / 7+ years durability CUTTER SETTINGSCricut: Blade: Standard Setting: VinylSilhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/sGraphtec: Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/sMH, SC2, LP3, & Titan 1: Blade: 45°/60° Gram Force: 80-85 Speed: 300mm/s *Blade Advancing VariesTitan 2 & 3 Blade: 45°/60° Gram Force: 60-65 Speed: 300mm/s *Blade Advancing VariesSettings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. APPLICATION INSTRUCTIONSApplication Instructions (Permanent) Cut on Pattern Side and DO NOT MIRRORAfter weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceSurface must be clean and dry (best on smooth hard surfaces)Application Instructions (Reusable) Cut on Pattern Side and DO NOT MIRRORAfter weeding excess vinyl, apply a transfer tape to transfer design off of the backing and place on your smooth & clean surfaceSurface must be clean and dry (MUST apply on smooth hard surfaces) apply, remove & reuse SIZE AND HOW TO APPLY1) Cut on pattern (Do not mirror)2) Weed excess vinyl 3) Clean Surface (Must be dry)4) Apply and peel mask
Read morePrinted Vinyl, BTS KPOP Group Patterned HTV & Adhesive Vinyl Sticker Decal 1 semana ago
Available in heat transfer vinyl HTV, permanent adhesive (sign) craft vinyl & reusable no residue adhesive vinyl & decal (Apply, Remove, Apply Again No Residue)Tons of patterns & options! Contact us if you’d like to make a special request or custom pattern!Contact us with any questions or requests!Professionally Printed Pattern Vinyl for HTV & Craft VinylHigh-quality pattern vinyl3 Options to choose from:• Siser Colorprint Easy Iron On Heat Transfer Vinyl• Patterned Oracal 651 Glossy Permanent Adhesive Craft Vinyl – Indoor/Outdoor Use• Reusable No Residue Adhesive Vinyl – Applies to any CLEAN/SMOOTH Hard Surface – Apply, Remove, Apply Again No ResidueIndoor/Outdoor UseBundle discounts available!Cut out any shape or design & apply!Take advantage of our huge selection of patterns & colors!Please be sure to check out the easy application instructions below!All you need is a plotter or cutter! *Iron for HTV*All Patterns are printed with a large format Roland printer that uses Eco-solvent genuine inks.Permanent Adhesive Craft Vinyl (Outdoor/Indoor Vinyl)Printable Oracal 651 – No Transfer Tape Provided• Great to use on glass, metal, plastic, and much more! Please clean surface before use!• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply a• transfer tape to transfer design off of the backing and place on your smooth & clean surface• Weatherproof / 4+ years durabilityReusable No Residue Adhesive Adhesive Craft Vinyl (Outdoor/Indoor Vinyl) Apply, Remove & Apply Again! No Residue!Comparable to 3M – No Transfer Tape Provided• Great to use on glass, metal, plastic, and much more! Please clean surface before use!• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, peel and apply (Recommended to be cut as a single piece or design)• transfer tape to transfer design off of the backing and place on your smooth & clean surface• Weatherproof / 7+ years durabilityIron on Heat Transfer Vinyl – For Any Garment or FabricPrinted on Siser ColorPrint Easy (TTD High-Tack Mask Provided)Heat Transfer is printed without the carrier. Siser TTD Easy Mask is providedfor application• Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply• TTD Easy Mask to transfer design off of the backing and place on your garment face up• Can be applied with a home iron and/or heat pressCUTTER SETTINGSCricut: Blade: Standard Setting: Iron OnSilhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6Roland GS/GX-24: Blade: 45° Gram Force: 80-90 Offset: 250 Speed: 25-50 cm/sGraphtec: Blade: 45° Gram Force: 9 Tool: CB09U+0 Speed: 25 cm/sSettings may vary based on blade condition and age of machine.Always perform a test cut prior to cutting designs.APPLICATION INSTRUCTIONSApplication Instructions (home iron)Set iron dial between Cotton and Linen Cover design with Kraft paper or non-stick cover sheet Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 15 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier hot or coldApplication Instructions (heat press)Cut material – don’t mirror! Weed excess material Mask with TTD High Tack Mask Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds Peel carrier hot or cold Cover and reheat for 2-3 secondsRECOMMENDED ACCESSORIES & CAREPatterned Vinyl Applies to: 100% cotton Poly/cotton blends 100% polyester Leather Lycra®/spandexRecommended Accessories: Weeder/TweezersLaundering: Wait 24 hours before 1st wash Machine wash cold / mild detergent Dry on normal dryer setting Do not dry clean Do not bleachHOW TO APPLYHTV 1) Do not mirror 2) Cut on pattern 3) Weed excess vinyl 4) Apply and peel mask 5) PressCraft Vinyl 1) Do not mirror 2) Cut on pattern 3) Weed excess vinyl 4) Apply and peel maskCUSTOM PATTERNS AND DESIGNSHave your own patterns you want to print?Contact us today!
Read moreVinyl Decal for Window - Soldiers on Battlefield Silhouettes (Military) 1 semana ago
Includes (1) single color decal. Please specify vinyl color at checkout.Can make other sizes upon request.Areas of Application: Car/Truck Windows, Car Body Surfaces, Bikes, Helmets, Motorcycles, Computers, Skateboards, Snowboards, Guitars, Mirrors, Laptops, Home Walls, Home Windows, Store Windows, Doors, Laminate, Boats, Toolboxes, etc. We use GreenStar IPV vinyl which is a 5-year, calendered vinyl, custom formulated for basic sign use. All colors come in a high gloss finish. Green Star IPV vinyl is great for general purpose interior/exterior graphics of all types including signs, banners, and window graphics. Green Star IPV vinyl has an outdoor lifespan of up to 5 years (3 years for metallic vinyl) and is made in USA. Application Instructions:Clean the area where you are going to apply the decal. If applied to a drinking cup, it can only be hand washed only after it is applied. Item comes in 3 layers. Peel off the white or blue backing paperApply the decal to your itemTake a credit card (or similar type card). Swipe in a even motion across the decal, to smooth and press onto surface.Remove (peel off) transfer tape in a even motion also
Read moreVinyl Decal for Window - Soldier Silhouettes (Military), Various Colors & Sizes 1 semana ago
Includes (1) single color decal. Please specify vinyl color at checkout.Can make other sizes upon request.Areas of Application: Car/Truck Windows, Car Body Surfaces, Bikes, Helmets, Motorcycles, Computers, Skateboards, Snowboards, Guitars, Mirrors, Laptops, Home Walls, Home Windows, Store Windows, Doors, Laminate, Boats, Toolboxes, etc. We use GreenStar IPV vinyl which is a 5-year, calendered vinyl, custom formulated for basic sign use. All colors come in a high gloss finish. Green Star IPV vinyl is great for general purpose interior/exterior graphics of all types including signs, banners, and window graphics. Green Star IPV vinyl has an outdoor lifespan of up to 5 years (3 years for metallic vinyl) and is made in USA. Application Instructions:Clean the area where you are going to apply the decal. If applied to a drinking cup, it can only be hand washed only after it is applied. Item comes in 3 layers. Peel off the white or blue backing paperApply the decal to your itemTake a credit card (or similar type card). Swipe in a even motion across the decal, to smooth and press onto surface.Remove (peel off) transfer tape in a even motion also
Read more1-10 20+10 Outdoor Vinyl Decal Numbers for Mailbox, Door, Wall, Address, Locker 1 semana ago
1 – 10 20 Numbers Vinyl Die Cut Decal Mailbox Door Wall Address Locker Sticker Set of Vinyl Die Cut Numbers for any need with some spare characters – 1,2,3,0. US Made Materials, Tools, and Designs. Made in Portland, Oregon. Oracal 651 Outdoor 6Yrs film.All Decals come with legit transfer film. Same Day USPS Tracked Shipping. Please, for more Dinosaur, and Wildlife and Animal-themed Vinyl Die Cut Decal Transfer Decals, check other listings in my store, including all the multi-colored ones)! Thank you!
Read moreGo Outside Bear Sticker Decal 1 semana ago
Very high quality sticker. Image is sharp and the vinyl is thick with a matte finish. Honestly one of the highest quality stickers I have seen. This item is out of packaging and in excellent condition.Approx. size: 3 inchesMaterial: Thick VinylFinish: MatteShipping: First Class USPS (arrives in small envelope with your letter mail)Important: Contact us directly with any issues related to your order. We guarantee our products 100%POSITIVE FEEDBACK WILL BE GIVEN WITHIN 24 HOURSThank you so much for your business 🙂 Listing and template services provided by inkFrog
Read moreSET OF 3 CUSTOM PERSONALIZED VINYL MAILBOX NUMBERS Street DECAL, (Model 2) 1 semana ago
Set of 2 Custom Decals Mailbox Address exactly as pictured Brand: Superior Model: Custom Mailbox 2 Color: White,Black,Blue,Gold,Silver,Brown Condition: New . Shipping: Free The Address Line can have up to 20 characters including spaces. Please keep in mind, the more text per line, the more narrow the lettering will be. · ALT Codes (ALT +0000) and Emoticons will not be engraved! This decal is made from our office here in the UNITED STATES. We use only high Quality outdoor 5 year calendared die-cut gloss vinyl. The background will be whatever you apply the decal on. It can be applied to any smooth surface. THIS IS NOT INTENDED FOR DRYWALL Custom sizes and quantities are available. Please contact me prior to purchase for quotes. Set of 3 decals, 1 for each side of the mailbox High quality – Self-adhesive – EASY TO APPLY – Elegant & MODERN Style Mailbox Address,Vinyl Mailbox Numbers,Address Decal Stickers Size: 11.5″ Wide X 5″ High EASY TO APPLY WITH ULTRA CLEAR TRANSFER TAPE Background: NO, This is a Single Color Decal and has NO background. The background color of this decal will be the surface it adheres to. Warranty: 5 Years (Will Not Fade Like Printed Decals ) Additional Information: IMPORTANT PLEASE READ: We recommend upgrading to «first class shipping», the cheapest shipping option with tracking, during checkout. The default/free shipping choice (NO TRACKING) can be slow and frustrating for all parties involved. It is just a stamp. We ship all orders very promptly, but there is no predicting how long the free shipping will actually take to arrive. Please consider this when choosing your shipping, especially if you are on any kind of important deadline for an event. This decal is made from our office here in the UNITED STATES. We use only high Quality outdoor 5 year calendared die-cut gloss vinyl. The background will be whatever you apply the decal on. It can be applied to any smooth surface. THIS IS NOT INTENDED FOR Unfinished DRYWALL EASY TO APPLY WITH ULTRA CLEAR TRANSFER TAPE Background: NO, This is a Single Color Decal and has NO background. The background color of this decal will be the surface it adheres to. Warranty: 5 Years (Will Not Fade Like Printed Decals ) You can trust that your order will be quickly processed and delivered Or Your Money Back. We have FREE SHIPPING policy (STAMPED ENVELOPE FOR THIS ITEM) FOR FASTER AND TRACKED SHIPPING USE FIRST CLASS OPTION (WITH CHARGE) , Our primary shipping service for this item is USPS Stamp services that take 2-10 business days from coast-to-coast We do not profit from shipping. We Are Not Responsible for wrong or incorrect mailing address. Our goal is to ensure your complete satisfaction with your purchase. If you are dissatisfied with your order for any reason, you can return your items for a prompt refund or exchange. ✓30DAYS MONEY BACK WARRANTY ✓Refunds for items returned within 30 Days After receiving the item will be credited in the full amount (excluding shipping charges) ✓Refund will be the same form as the original payment type. (NO RESTOCKING FEE) ✓Please contact us before leave any negative feedback, we will be glad to resolve any issue with your order.
Read moreDeliver Packages To Back Porch Do Not Leave At Gate Metal Sign EI194 Delivery 1 semana ago
Available As An Aluminum Sign / Magnetic Sign / Vinyl Decal Aluminum Signs Are Available In Five Versions5″ x 7″ / 8″ x 12″ / 12″ x 18″Treated With Ultra UV Protection To Prevent FadingPrinted directly onto the metal signSigns do not have stickers, decals, paint or vinyl letteringWon’t fade, crack, peel, chip or rust. 5″ x 7″ (.025 thickness) Signs have square corners, two strips of mounting tape and no holes 8″ x 12″ (.025 thickness) Signs have rounded corners and are available in TWO OPTIONSAVAILABLE WITH 1/4″ MOUNTING HOLESALSO AVAILABLE WITHOUT MOUNTING HOLES BUT MOUNTING TAPE IS ATTACHED TO THE BACK OF THE SIGN 8″ x 12″ (.032 thickness) Signs have rounded corners and two 1/4″ mounting holes 12″ x 18″ (.032 thickness) Signs have rounded corners and two 1/4″ mounting holes Decals are 4″ X 6″Vinyl decals do not have holesPrinted with eco-solvent ink guaranteed to last 5 to 7 yearsDecals are shipped USPS First Class Mail with trackingCUSTOM DESIGN DECALS ALWAYS AVAILABLE Magnetic Signs Offer The Option Of Being RemovableYou can display the sign on your garage door or front door when you are expecting a deliveryand then remove it when no delivery is expectedPerfect if you’d prefer not to have a sign mounted permanentlyMagnetic signs are 7″ x 10″ or 5″ x 7″ and have no holesPLEASE CHECK TO MAKE SURE THAT MAGNETS STICKTO THE AREA THAT YOU PLAN TO USE THE MAGNETIC SIGNSome doors are aluminum and the signs may not stick PREMIUM QUALITYMade In The U.S.A.FAST SHIPPING100% COMPLETE SATISFACTION GUARANTEEDYour item will arrive quickly and in perfect condition.If there is anything about the transaction that doesn’t meet your expectations,or if your item is damaged in shipping by the post office,Please send us a message and give us the opportunity to address your concernWe promise to correct all problems to your complete satisfaction as quickly and easily as possible.EVERYTHING THAT WE SELL IS100% Designed, printed and shipped by Signs Online USA from our location in Indiana SINCE 1998We completely make every item that we sellThank you for supporting a family owned business
Read more