17 Jul 2026

IN-18 Arduino Shield Nixie Tubes Clock in Acrylic Case [TUBES OPTIONAL] 7 días ago

Nixie Tubes Clock IN-18 Arduino Shield in Acrylic Case with Sockets and Columns UPS Express delivery highly recomended Economy Shipping slow and unreliable The Arduino Nixie Tubes Shiled NCS318 allow you to make 6 digits Nixie Tubes Clock in “Divergence Meter Mini” style (by GRA & AFCH).Nixie Tubes Clock in beautiful Acrylic CaseOr You can just display any 6 digits strings on this IN-18 Nixie Tubes made in xUSSR.Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world, everyday.PCB design, schematic, housing and software made by GRA & AFCH.Nixie Tubes Clock Shield NCS318 compatible with Arduino Uno and Mega.It allows you to write your own unique programs on the Arduino platform, the latest sources are always available on GitHub. listing: Nixie Tubes Clock on IN-18 Tubes in Acrylic Case (TUBES OPTIONAL) – 1 pc.Power supply 12 V/1A (optional) [US/ EU/ UK/ AU (see above) ] – 1pc.Columns with Dots (optional, choose in selector) – 2 pcs.Printed User manual on vintage-style paper – 1 pc. Our Benefits: Easy to build beautiful clock – we offer housingA special socket for each pin IN-18 – Easy to change tubes Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB The latest version of the firmware always available on GitHub No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu Very high qualty of Printed Circuit Boards Japan alluminium capacitors Power-On Self-Test Technical support Dear customers!If you have ANY questions, (PLEASE ASK us). Software Features: Shield support 6 IN-18 Nixie tubes [hh:mm:ss] Full static display mode Slote Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) with Backup battery 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection IN-18 Nixie Tubes Clock size: 307 mm x 94 mm x 96 mm. IN-18 Arduino Shield Nixie Tubes Clock gallery: Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged

Read more
17 Jul 2026

KIT for IN-18 Nixie Tubes Clock PCBs + All Parts 12/24H SlotMachine NO TUBES 7 días ago

DIY KIT for IN-18 Nixie Tubes ClockBoards and Electronics parts WITHOUT TUBESUPS Express delivery is highly recommendedEconomy Shipping is very slow and unreliable Project «Divergence Meter» has modular system, so you can build Clock with 4, 6 or 8 Tubes To build Cock with 6 Tubes you need one MCU Control Board NCM109 and Tubes Board NCT318 To build 8 Tubes Clock you need additional one Tubes Board NCT818 To build Clock on 4 Tubes you need cut the Tubes Board along the line (as shown on photo) DIY KIT is compatible with Arduino UNO, it allows you to write your own unique programs on the Arduino platform All the latest sources are always available on our github.com/afch/NixieClock PCB Design Schematics Case and Software made by GRA & AFCH example of assembled IN-18 Nixie Clock (glass Columns are sold separately) Listing includes:Tubes NCT318 and Control NCM109 Boards Bare PCBsSet of Electronic Parts and Components for NCT318 and NCM109 BoardsSet of Hex Spacers and Screws for NCT318 and NCM109 BoardsSet of Socket Pins for 6 IN-18 Nixie Tubes (included with the KIT)NE2H Neon Bulbs for Dots – 3 pcs (2 Neons for Dots and one spare)Principal Electrical Schemes for NCT318 and NCM109 BoardsBOM Lists for NCT318 and NCM109 BoardsUser Manual on vintage style paper Power supply is NOT included buy it separately: www.ebay.com/itm/182053434777 *The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s) Dear customers! If you have ANY questions, PLEASE ASK us Software Features: Clock support many kinds of Nixie tubes (4 tubes [hh:mm], 6 tubes [hh:mm:ss] and 8 tubes [HH:MM:SS:uu**/Temp]). ** – shows 100’s and 10’s of micro seconds. 12/24 hour format. Date format 6 tubes: [DD:MM:YY] and tubes 8: [DD:MM:YYYY]Slot Machine (Anti poisoning – tubes saving function. Increases the service life). Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Software based on Arduino sketch, so MCU has Arduino bootloader within. Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure. Hardware Features: Special schematic that prevent “blue spot” effect inside IN-18 tubes Full static displaying mode No flickering High brightness High contrast High precision Real Time-Clock chip DS3231SN Integrated High Voltage Power supply 150 – 220V 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual) Test points for testing, adjust and control low and high voltage circuits Pads for internal buttons and terminals for external buttons Pads for internal USB connector and terminals for external USB Terminals for internal and external power connector 2 dots column with separate controls upper and lower dots (sold separately) Power consumption: 12V, 1000mA (Recommended power source: voltage 12V, current 1-2A) MCU board NCM107 has world smallest size: 100 x 50mm Tubes board NCT318 size: 264 x 50mm Tubes board NCT818 size: 94 x 50mm Actual photos of the DIY KIT: Tubes board NCT318 Tubes board NCT818 MCU NCM109 bare board (top)MCU NCM109 bare board (bottom)Assembled MCU board top side chartAssembled MCU board bottom side BARE PCB Tubes board NCT318 top side: Bottom side: Bare tubes board NCT818 (top) Bare tubes board NCT818 (bottom) Boards Dimensions in 2D and 3D MCU board NCM107 PCB Top view MCU board NCM107 PCB Bottom Tubes board NCT318 in 3D Tubes board NCT818 Dimensions of NCM107 in 2D Dimensions of NCT318 board Tubes board NCT818 Example of using this boards: MCU board NCM107 with NCT318 MCU board NCM107 + NCT318 with glass columns (sold separately) MCU board NCM107 and NCT318 with additional NCT818 board MCU board NCM107 + NCT318+ NCT818 and glass columns (sold separately) Example of assembled clock (without case) On IN-18 tubes Lot sold WITHOUT tubes with glass columns (sold separately) with glass columns (sold separately) See our video presentation of Large Nixie Clock IN-18 by GRA & AFCH Operating instruction Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standard shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zealand:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zealand:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zealand:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged Customs PolicyWe as a seller do not receive from the buyer any charges any sales taxes and handling fees.In any case we are not responsible for Tax(VAT) or any other Import duties or any other equivalent fees that arises upon delivery.Please consult with your local Customs legislation and visit your local Customs department or website before making any purchases. Dear customers! If you have ANY questions, PLEASE ASK us

Read more
17 Jul 2026

KIT IN-14 Arduino Shield NCS314 Nixie Clock WITH TUBES FREE SHIPPING 7 días ago

DIY KIT IN-14 Arduino Shield Nixie Tubes Clock Shield for Arduino UNO/ MEGA NCS314 HW v2.2We provide FREE WORLDWIDE Economy shipping UPS Expedited delivery 3-5 days available DIY KIT for IN-14 Shield Nixie Clock with ColumnsDeveloped for 6 IN-14 xUSSR Nixie TubesIN-14 Tubes are one of the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesDIY KIT developed for Tubes Shield Board and Control Arduino BoardOptions include Tubes, Columns, Arduino and Power SupplyDIY KIT is made for Arduino UNO and MEGA 2560 Control BoardsIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH Example of assembled Shield NCS314 Board: Listing includes:Tubes Shield (NCS314 v2.2) Bare PCBIN-14 Nixie Tubes – 6 pcsSet of Electronic Parts and Components for Shield (NCS314 v2.2) BoardSet of Screws and Spacers for Shield and Arduino BoardsPrincipal Electrical Scheme on paperBOM List for Shield (NCS314 v2.2) BoardUser Manual on a Vintage style paper The base listing contains only BARE PCB and full set of electronics partsWithout Arduino, Columns and Power SupplyListing includes bare PCB to make Shield NCS314 with soldered IN-14 Nixie Tubes This listing does NOT contain the Arduino board and power supply We are selling already flashed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951Flashed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626Power supplies: www.ebay.com/itm/162367596648Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779Glass Column: www.ebay.com/itm/162276387248GPS Receiver GA-6: https://www.ebay.com/itm/162682147400IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139 …And upload software into your arduino Link to (software) github.com/afch/NixeTubesShieldNCS314 Link to (video tutorial) Our Benefits: Easy to build beautiful clock – we offer housing Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB The latest version of the firmware always available on GitHub No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu Very high qualty of Printed Circuit Boards Japan alluminium capacitors Power-On Self-Test Technical support Dear customers!If you have ANY questions, PLEASE ASK us Software Features: Shiled support 6 IN-14 Nixie tubes [hh:mm:ss] Full static display mode Slote Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery Acquiring time via external GPS module (only with Arduino Mega) 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 12V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) Shields comparison table: https://youtu.be/58xMATPCJ-I https://youtu.be/FMEhx8zmo_0 IN-14 Arduino Shield NCS314 v2.2 Electrical Scheme: Actual photos of the Shield NCS314 DIY KIT:Arduino Nixie Tubes Clock Shield NCS314 Top ViewArduino Nixie Tubes Clock Shield NCS314 bottom View Board dimensions in 2D and 3D Nixie Tubes Clock Shield for Arduino NCS314: This is example of assembled Shield Board NCS314 The base listing contains only BARE PCB and full set of electronics parts (Arduino, Columns and Power Supply are not included) User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged

Read more
17 Jul 2026

DIY KIT Nixie Tubes Clock IN-12 Arduino Shield NCS312 [WITH OPTIONS] 12/24H GPS 7 días ago

DIY KIT IN-12 Arduino Shield Nixie Tubes Clock Shield for Arduino UNO or MEGA – NCS312 UPS Express delivery is highly recommended Economy Shipping very slow and unreliable The Ardrduino Nixie Tubes Shiled NCS312 allow You to make 6 digits Nixie Tubes Clock in “Divergence Meter Mini” style (by GRA & AFCH). Or You can just display any 6 digits strings on this IN-12 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world, everyday. PCB design, schematic, housing and software made by GRA & AFCH. Nixie Clock Shield NCS312 compatible with Arduino UNO/Genuino & Arduino MEGA, so it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on github at the «NixeTubesShieldNCS314» repository Listing includes:Bare NCS312 Shield Board IN-12 Nixie Tubes – 6pcs (optional, choose in selector)NE2H-1 Neon Lamps for Dots – 4 pcsArduino Control Board (optional, UNO or MEGA)GPS Receiver – (optional, choose in selector)IR Remote – (optional, choose in selector)Set of Socket pins for 6 IN-12 Nixie Tubes (72 pcs)Set of electronics partsSet of hex spacers and screwsClear Acrylic Stand for NCS312 ShieldPower supply (12V/1A) (optional AC plug US EU UK AU)BOM List of CompnentsPrincipal Electrical SchemeUser Manual on vintage-style paper Base Listing contains Shield NCS312 with IN-12 Nixie Tubes and NE2H Neon LampsOptional part can be purchase separately by links below We are selling already flashed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951Flashed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626Power supplies: www.ebay.com/itm/162367596648GPS Receiver GA-6: https://www.ebay.com/itm/162682147400IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139 …And upload software into your arduino Link to (software) github.com/afch/NixeTubesShieldNCS314 Link to (video tutorial) link was hidden by eBay Our Benefits: Easy to build beautiful clock – we offer housing Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB The latest version of the firmware always available on GitHub No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu Very high qualty of Printed Circuit Boards Japan alluminium capacitors Power-On Self-Test Technical support Dear customers!If you have ANY questions, (PLEASE ASK us). Software Features: Shiled support 6 IN-12 Nixie tubes [hh:mm:ss] Full static display mode Slote Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery Acquiring time via external GPS module (only with Arduino Mega) 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 12V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) IN-12 Arduino Shield Nixie Tubes Clock on Acrylic Stand Boards Dimensions in 2D and 3D Nixie Tubes Clock Shiled for Arduino NCS312: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged

Read more
17 Jul 2026

DIY KIT IN-12 Nixie Tubes Clock with Acrylic Stand [WITH OPTIONS] FREE SHIPPING 7 días ago

DIY KIT IN-12 NCT412 Nixie Tubes Clock with Nixie Tubes and Acrylic Stand FREE WORLDWIDE Economy shipping UPS Expedited delivery 3-5 days also available Project designed for 6 IN-12 Nixie tubes [hours : minutes : seconds]. For that clock You will need one MCU boards NCM107 and one Tubes board NCT412PCB design, schematic, housing and software made by GRA & AFCHKit includes MCU (microcontroller unit) ATmega328p flashed with Arduino Uno Bootloader and sketch (Firmware)Kit is compatible with Arduino Uno, so it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on github at the «NixeClock» repository. Listing contains:MCU NCM109 Control Board bare PCBNCT412 Tubes Board bare PCBSet of Parts and Components (electronic, mechanical)IN-12 Nixie Tubes – 6 pcs (optional, choose in selector)NE2H Neons (for Dots) – 4 pcsClear Acrylic Stand (included, free of charge) Power Supply (12V, 1A) (US, EU, UK, AU) (optional, choose in selector)Temperature sensor () (optional, choose in selector)User Manual on Vintage-style paperPrincipal Electrical Schemes for PCBs (MCU NCM109, NCT412)BOM Lists for PCBs (MCU NCM109, NCT412) Listing contains bare PCBs, all necessary parts, IN-12 Nixie Tubes, Power Supply, Temperature sensor and Acrylic Stand Dear customers!If you have ANY questions, PLEASE ASK us Software Features:Clock support many kinds of Nixie tubes (6 tubes [hh:mm:ss] format and 4 tubes [hh:mm]). How to make a clock on 4 tubes? You need to cut the board, see the video below.12/24 hour format.Slote Machine (Ani poisoning)Date format: DD:MM:YYUnique RGB LEDs backlight with 16,7 millions colors.Very easy to switch LEDS off/on.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).Easy updating firmware via USB using Arduino IDE.Software based on Arduino sketch, so MCU has Arduino bootloader within.Power On Self Test (POST): LEDs test, tubes test, input voltage test, sound test. Hardware Features:Integrated High Voltage Power supply 150 – 220V.ICSP connector for flashing Arduino Bootloader to blank MCU.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 millions colors. It can be disabled in the menu (see manual).Test points for testing, adjust and control low and high voltage circuits.Pads for internal buttons and terminals for external buttons.Pads for internal USB connector and terminals for external USB.Terminals for internal and external power connector.Terminals for external and internal buzzer.2 dots column with separate controls upper and lower dots.Power consumption: 11-14V, 360mA (Recommended power source: voltage 12V, current 1-2A).MCU board NCM107 has world smallest size: 100mmx50mm.Tubes board NCT412 size: 180mmx50mm. We include Acrylic Stand with DIY KIT Actual photos of KIT:With TubesMCU NCM109 bare board (top)MCU NCM109 bare board (bottom)Assembled MCU board top side chartAssembled MCU board bottom side chart Bare tubes board NCT412 (top) Bare tubes board NCT412 (bottom) NCM109 board assembling process (part 1/2) Cutting the Nixie Clock board, get 4 Nixie Tubes tube from 6 tubes Boards Dimensions in 2D and 3DMCU board NCM109 PCB Top viewMCU board NCM109 PCB Bottom Tubes board NCT412 in 3D Dimensions of NCM109 in 2D Dimensions of NCT412 Examples of assembled boardsMCU Assembled PCB Top sideMCU Assembled PCB Bottom side Example of assembled IN-12 Nixie Tubes Clock: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shaipments are paid by the buyerNo restocking fees are charged

Read more
17 Jul 2026

Asian Peking Opera Lady, Beaded Art, Finished Diamond Painting Home Decor 7 días ago

This Asian Peking Opera Lady beaded art painting is a beautiful addition to any room in your home. The finished diamond painting depicts a stunning portrait of a lady, perfect for those who appreciate Victorian-era aesthetics. The canvas material and easy-care instructions make it a convenient and stylish choice for your living space. Display it in your bedroom, office, or any room to add a touch of modern/vintage charm.

Read more
17 Jul 2026

Sharp Camouflage Alarm Clock. Plug In, Camp Decor, Boy, Hunting, Works 7 días ago

The Sharp Camouflage Alarm Clock is a modern digital clock designed for adults that fits in both stylish and practical settings. With a green camouflage color and a plastic frame material, this alarm clock from the 21st century features an alarm function and a sleek design perfect for any bedroom decor. The clock is electrical powered and weighs less than 1 lb, making it a convenient addition to any home looking to add a touch of modern style with a hint of nature-inspired elements from the world of hunting and camping.

Read more