Brushed Oak Case for IN-12Nixie Tubes Clock by GRA & AFCHUPS Express delivery is highly recommendedEconomy Shipping can be slow and unreliable Project “Divergence Meter mini”Brushed Oak Case for IN-12 Nixie Tubes ClockCase is designed for 6 IN-12 (AB) xUSSR Nixie TubesCase compatible with NCT412 and NCM109 BoardsOnly the Case in this Listing without Tubes and ElectronicsIN-12 Tubes are one of the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksPCB, Design, Schematics, Case and Software made by GRA & AFCH Brushed Oak Case for IN-12 Nixie Tubes Clock Listing includes: Oak Case for IN-12 Nixie ClockSet of Screws and Nuts Case is shipped disassembled for safe deliveryListing includes only the Case without the Tubes and Electronics! Dear custumers! If you have ANY questions, PLEASE ASK us. Features: Oak Case is fully compatible with NCM109 and NCT412 BoardsMaterials: Oak, Rubber, BrassOak thickness: 3 mmOak Case have holes for the Control Buttons, Power Supply, USB port and Temperature sensorOak Case size: 234 mm x 70 mm x 42 mm Our Benefits: A special socket for each pin IN-12 – Easy to change tubesEasy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USBThe latest version of the firmware always available on GitHubNo need to download drivers – we are use only Genuine USB to serial converters (FTDI FT230). Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menuVery high qualty of Printed Circuit BoardsJapan alluminium capacitorsPower-On Self-TestTechnical support IN-12 Nixie Tubes Clock in a Brushed Oak Case by GRA & AFCH: Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shaipments are paid by the buyerNo restocking fees are charged
Read moreIN-8 Shield Nixie Clock with Sockets, Dots and options with Expedited shipping 2 días ago
IN-8 Nixie Clock with Sockets and Dots. Arduino Shield Nixie Tubes Clock with Columns. Designed for 6 IN-8 xUSSR Nixie Tubes with Sockets. IN-8 Tubes are one of the most popular mass-produced Nixie Tubes.
Read moreAcrylic Case for IN-18 Arduino Shield Nixie Tubes Clocks 2 días ago
Acrylic Case for IN-18 Arduino Shield Nixie Tubes Clocks Beautiful Acrylic Case for Nixie Clocks based on Arduino Shield boards.Acrylic Сase model compatible with Clocks on IN-18 Nixie Tubes.Only the Acrylic Case is for sale, WITHOUT internal electronics! Listing contains:Acrylic Case Model ACNS3xx v3.3 – 1pcs.Screws: M4 50 mm – 4pcs.Closed Nuts M4 – 4pcs. Acrylic Case comes disassembled for safe delivery Dear customers!If you have ANY questions, (PLEASE ASK us). Hardware Features:The acrylic case is fully compatible with Arduino board + Shield NCS318 boardMaterials: Acrylic, RubberAcrylic thickness: 3 mmAcrylic Case have holes for the control buttons, power supply, and USB portAcrylic Case size (without Tubes): 307mm x 94mm x 36mm Acrylic Case for Nixie Tubes Clocks photo gallery: Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shaipments are paid by the buyerNo restocking fees are charged
Read moreDIY KIT for IN-18 Arduino Shield Nixie Tubes Clock with Columns [TUBES OPTIONAL] 2 días ago
DIY KIT for IN-18 Arduino Shield NCS318 Nixie Tubes Clock with Sockets and Columns UPS Express delivery is highly recommended Economy Shipping very slow and unreliable The Arduino Nixie Tubes Shiled NCS318 allow you to make 6 digits Nixie Tubes Clock in “Divergence Meter” style (by GRA & AFCH). Or you can just display any 6 digits strings on this IN-18 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world, everyday. PCB design, schematic, housing and software made by GRA & AFCH. Nixie Clock Shield NCS318 compatible with Arduino Uno and Mega, so it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on github at the «NixeTubesShieldNCS318» repository. listing: Nixie Tubes Shield NCS318 v 1.1 – 1 pcArduino board UNO or MEGA – 1 pc (optional)Power supply 12 V/1A (optional) [US/ EU/ UK/ AU (see above) ] – 1pc.IN-18 Nixie Tubes – 6 pcs (optional)Columns with Dots (optional, choose in selector) – 2 pcs.Set of electronic parts and components – 1 pc.Set of Hex pillars – 1 pc.Printed electronic sheme for Shield board – 1 pc.Printed User manual on vintage-style paper – 1 pc. Our Benefits: Easy to build beautiful clock – we offer housingA special socket for each pin IN-18 – Easy to change tubes Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB The latest version of the firmware always available on GitHub No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu Very high qualty of Printed Circuit Boards Japan alluminium capacitors Power-On Self-Test Technical support Dear customers!If you have ANY questions, PLEASE ASK us Software Features: Shiled support 6 IN-18 Nixie tubes [hh:mm:ss] Full static display mode Slote Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) with Backup battery 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS318 PCB size: 264 mm x 90 mm x 53 mm. Assembled Nixie Tubes Clock Arduino Shiled NCS318: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read moreIN-18 Nixie Tubes Clock Arduino Shield NCS318-4 with Columns [TUBES OPTIONAL] 2 días ago
IN-18 Arduino Shield NCS318-4Nixie Tubes Clock with Columns and Sockets UPS Express delivery is highly recommended Economy Shipping very slow and unreliable The Arduino Nixie Tubes Shiled NCS318-4 allow You to make 4 digits Nixie Tubes Clock in “Divergence Meter” style (by GRA & AFCH).You can display any 4 digit strings on this IN-18 Nixie Tubes made in xUSSR.Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world everyday. PCB design, schematic, case and software made by GRA & AFCH. Nixie Clock Shield NCS318-4 compatible with Arduino Uno and Mega.It allows you to write your own unique programs on the Arduino platform.The latest sources are always available on github at the «NixeTubesShieldNCS318» repository. listing includes: NCS318-4 board – 1 pc.Arduino UNO or MEGA – 1 pc (optional). IN-18 Nixie Tubes – 4 pcs (optional). NE-2H Neon lamps – 2 pcs.Glass Column – 1 pcs (optional) GPS, Remote – optional. Set of hex spacers and screws. User manual on vintage-style paper. Our Benefits: Easy to build beautiful clock – we offer housingA special socket for each pin IN-18 – Easy to change tubes Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB The latest version of the firmware always available on GitHub No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu Very high qualty of Printed Circuit Boards Japan alluminium capacitors Power-On Self-Test Technical support Dear customers!If you have ANY questions, PLEASE ASK us Software Features: Shiled support 4 IN-18 Nixie Tubes [hh:mm:ss] Full static display mode Slote Machine (Antipoisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, included optionaly) Operation via IR remote control (Remote control Sony RM-X151, included optionaly) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) with Backup battery 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS318-4 PCB size: 170 mm x 53 mm x 20 mm. Nixie Tubes Clock Arduino Shiled NCS318-4 User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read moreDIY KIT for IN-18 Arduino Shield NCS318-4 [Tubes, Column, Arduino, Accessories] 2 días ago
DIY KIT for IN-18 Arduino Shield NCS318-4Nixie Tubes Clock with Columns and Sockets UPS Express delivery is highly recommended Economy Shipping can slow and unreliable DIY KIT for IN-18 Shield Nixie Clock with ColumnDeveloped for 4 IN-18 xUSSR Nixie Tubes with SocketsIN-18 Tubes are one of the biggest mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesDIY KIT developed for Tubes Shield Board and Control Arduino BoardOptions include Tubes, Column, Arduino, Power SupplyAccessories include GPS Receiver and RemoteDIY KIT is made for Arduino UNO and MEGA 2560 Control BoardsIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH Listing includes: Tubes Shield (NCS318-4) Bare PCBControl Arduino Board (UNO or MEGA 2560) (optional, choose in selector)IN-18 Nixie Tubes – 4 pcs (optional, choose in selector)Set of Electronic Parts and Components for Shield (NCS318-4) BoardSet of Screws and Spacers for Shield and Arduino BoardsGlass Column (for two Dots) (optional, choose in selector)GPS Receiver (GA-6) (optional, choose in selector)Remote () (optional, choose in selector)Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)Principal Electrical Scheme on paperBOM List for Shield (NCS318-4) BoardUser Manual on a Vintage style paper Power Supply is optional for the KIT We offer optional accessories for Arduino Nixie Clocks Dear customers!If you have ANY questions, (PLEASE ASK us). Software Features: Shiled support 4 IN-18 Nixie Tubes [hh:mm:ss] Full static display mode Slote Machine (Antipoisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, included optionaly) Operation via IR remote control (Remote control Sony RM-X151, included optionaly) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) with Backup battery 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS318-4 PCB size: 170 mm x 53 mm x 20 mm. Our Benefits:Easy to build beautiful clock – we offer housingA special socket for each pin IN-18 – Easy to change tubes Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USBThe latest version of the firmware always available on GitHubNo need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menuVery high qualty of Printed Circuit BoardsJapan alluminium capacitorsPower-On Self-TestTechnical support IN-14 Arduino Shield NCS314-4 Electrical Scheme: IN-18 Arduino Shield NCS318-4 Nixie Tubes Clock by GRA & AFCH: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read moreDIY KIT IN-18 Shield for Arduino Nixie Clock with Sockets NO TUBES ARDUINO PSU 2 días ago
Nixie Tubes Clock with Sockets for Tubes. Arduino Shield Nixie Tubes Clock with Columns. DIY KIT for IN-18 Shield Nixie Tubes Clock. Designed for 6 IN-18 xUSSR Nixie Tubes with Sockets. IN-18 Tubes are one of the biggest mass-produced Nixie Tubes.
Read moreIN-18 Arduino Shield Nixie Tubes Clock with Columns 12/24H SlotMachine NO TUBES 2 días ago
IN-18 Arduino Shield NCS318 Nixie Tubes Clock for Arduino UNO or MEGA 2560 Without TUBES UPS Express delivery is highly recommended Economy Shipping very slow and unreliable The Arduino Nixie Tubes Shiled NCS318 allow you to make 6 digits Nixie Tubes Clock in “Divergence Meter” style (by GRA & AFCH). Or you can just display any 6 digits numerical strings on this IN-18 Nixie Tubes, made in xUSSR. Hundreds of thousands of Arduino boards are already inspiring people creativity all over the world, everyday. PCB design, schematic, cases and software made by GRA & AFCH. Nixie Clock Shield NCS318 designed for Arduino Uno or Mega, so it allows you to write your own unique programs on the Arduino platform. The latest sources files are always available on our github channel Downloads: Firmware for Shield Board NCS318: gra-afch/category/downloads/firmware/firmware-for-board-without-cases/USB Drivers for PC: gra-afch/category/downloads/drivers/Schematics for Shield board NCS318: gra-afch/category/downloads/schemes/shields/User manual: gra-afch/category/downloads/manuals listing: Assembled NCS318 Shield board – 1 pc. IN-3 Neon lamps in Columns – 4 pcs. Set of hex spacers and screws. User manual on vintage-style paper. This listing does NOT contain the TUBES, Arduino board, GPS, Remote and Power Supply. All Accessories are available below We are selling already programmed Arduino UNO here: www.ebay.com/itm/162377278951Programmed Arduino Mega: www.ebay.com/itm/162377285626Power supplies: www.ebay.com/itm/162367596648Glass Column with dots: www.ebay.com/itm/162276387248GPS Receiver GA-6: www.ebay.com/itm/162682147400IR Remote Controller RM-X153: www.ebay.com/itm/162682141139 …And upload software into your arduino Software: on our channel github/afch/NixeTubesShieldNCS314 Video tutorial: on our channel youtube/DQZWPn0iAHw Our Benefits: Easy to build beautiful clock – we also offer Clock case in two versions: economic Acrylic case and outstanding Wooden case. Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB. The latest version of the firmware is always available on GitHub. No need for additional drivers– we are use only Genuine USB to serial converters. Drivers for them are pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu. Very high qualty of PCB. Japan alluminium capacitors. Power-On Self-Test. Competent Technical support Dear customers!If you have ANY questions, (PLEASE ASK us). Software Features: 6 digits IN-18 Nixie Tubes [hh:mm:ss].12/24 hour format.Date format: DD:MM:YY.Full static display mode. The maximum possible brightness of the tubes.Slot Machine (Anti poisoning – tubes saving function. Increases the service life).Temperature display [Celsius or Fahrenheit] (optional, choose in selector)GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 V power supply, optional, choose in selector)IR remote controls (Remote control model Sony RM-X151/RM-X153, optional, choose in selector). IR protocol SIRC or any protocol if you able to implement it.Automatic update information on the tubes.Unique RGB LED backlight with 16,7 million colors.Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!Switching on/off LED backlight in the matter of seconds.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: Mission Impossible, We Wish You…).Easy updating firmware via USB using Arduino IDE.Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segement failure. Hardware Features: Integrated adjustable High Voltage Power supply: 150 – 220 V.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors.Test points for testing, adjusting and controlling low and high voltage circuits.Internal buzzer.Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery.3 buttons on board to control.IR Reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA – works fluently.Temperature sensor connector (DS18B20; 1-Wire protocol).8 pcs of RGB SMD LEDs.SPI up to 4Mhz.Places for 2 column with 2 neon dots inside.Separate controls upper and lower dots.Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive “+”).Reverse polarity protection.Nixie Tubes Clock Shield NCS318 size: 264(L) x 90(H) x 53(W) mm. Shields comparison table: Arduino Nixie Tubes Clock Shield NCS318 User Manual Shipping and return information Items will be shipped from Ukraine via international registered airmailwithin 1 business days after payments received and verified. It will take about 2-5 days (UPS Express) and 15-35 days (Economy Shipping). We combine multiple items to save on shipping.UPS Express Shipping Time (We recommended) Europe: 2-4 days Germany: 2-4 days USA, Canada: 3-5 days Asia, South America: 3-5 days Australia, New Zeland: 3-5 days Africa, Central America: 3-5 daysEconomy Shipping Time Europe: 15-12 days Germany: 15-18 days USA, Canada: 18-35 days Asia, South America: 18-35 days Australia, New Zeland: 20-35 days Africa, Central America: 23-35 days Return policy All returns are accepted. You should contact us within 14 Days after receiving the item. Refund given as Money back or replacement (buyer’s choice). Return shipping will be paid by buyer. No restocking fee will be charged.
Read moreIN-18 SHIELD NCS318 RASPBERRY PI HAT or ARDUINO NIXIE CLOCK [WITH OPTIONS] 2 días ago
IN-18 Arduino Shield NCS318 Raspberry Pi HAT Nixie Tubes Clock with Columns and Sockets with Adapter and Power Supply UPS Express shipping is highly recommended Economy shipping is very slow and unreliable Project “Divergence Meter HAT”Arduino Shield/Adapter/Raspberry Pi Nixie Clock with ColumnsDesigned for 6 IN-18 xUSSR Nixie Tubes with SocketsIN-18 Tubes are the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesOptions include Tubes, Columns, Raspberry Pi, Power SupplyAccessories include Temp. sensor, GPS Receiver, IR RemoteClock features Adapter from Arduino Shield to Raspberry Pi BoardShield Board is designed for Arduino UNO and MEGA 2560 BoardsIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH IN-18 Arduino Shield with Adapter Raspberry Pi HAT Nixie Tubes Clock with Columns and Sockets Listing includes:Shield Board with Sockets (NCS318)IN-18 Nixie Tubes – 6 pcs Set (optional, choose in selector)Columns with NE2H Dots – 2 pcs (optional, choose in selector)Adapter from Raspberry Pi to Arduino Shield (included, NCS3XX)Raspberry Pi Board (optional, choose in selector)Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector) User Manual on a Vintage style paper Dear customers!If you have ANY questions, PLEASE ASK us Our Benefits:Easy to customize firmware under Your own needs, thanks to an open platform – Raspberry Pi/ Arduino.Fast uploading via USB.The latest version of the firmware is always available on GitHub.Human friendly menu.Very high qualty of PCB.Japan alluminium capacitors.Competent Technical support. Software Features:6 digits IN-18 Nixie tubes [hh:mm:ss].12/24 hour format. Time synchronization via the Internet Full static display mode. The maximum possible brightness of the tubes.Automatic update information on the tubes.Unique RGB LED backlight with 16,7 million colors. Hardware Features:Integrated adjustable High Voltage Power supply: 150 – 220 V.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors.Test points for testing, adjusting and controlling low and high voltage circuits.Internal buzzer.Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery.3 buttons on board to control.IR reciver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote controll, we strongly recommend the using of Arduino MEGA – works fluently..Temperature sensor connector (DS18B20; 1-Wire protocol).8 pcs of RGB SMD LEDs.SPI up to 4Mhz.Places for 2 column with 2 neon dots inside.Separate controls upper and lower dots.Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive “+”).Reverse polarity protection.Nixie Tubes Clock Shield NCS318 IN-18 size: 264(L) x 90(H) x 53(W) mm IN-18 Arduino Shield NCS318 Raspberry Pi HAT Nixie Tubes Clock: Raspberry Pi to Arduino Shield adapter: Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shaipments are paid by the buyerNo restocking fees are charged
Read moreIN-18 Nixie Tubes Clock Shield NCS318 for Arduino with Columns [TUBES OPTIONAL] 2 días ago
IN-18 Nixie Tubes Clock with Columns Shield NCS318 for Arduino® with SocketsUPS Express delivery highly recommended Economy shipping slow and unreliable Nixie Tubes Shield NCS318 allow you to make 6 digits Clock in “Divergence Meter” style (by GRA & AFCH) Or you can just display any 6 digits strings on this IN-18 Nixie Tubes made in xUSSR Hundreds of thousands of Arduino® Boards are already fueling people’s creativity all over the world, everyday PCB design, schematic, housing and software made by GRA & AFCH Nixie Clock Shield NCS318 compatible with Arduino® Uno and MegaIt allows you to write your own unique programs on the Arduino® platformAll the latest sources are always available on github at the «NixeTubesShieldNCS318» repository Listing includes: Shield Tubes Clock with Sockets (NCS318 Shield)IN-18 Nixie Tubes – 6 pcs Set (optional, choose in selector)Columns with Dots – 2 pcs (optional, choose in selector)Control Board – (UNO or MEGA 2560) (optional, choose in selector)Temperature sensor, GPS Receiver, IR Remote – (optional, choose in selector) Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)User Manual on Vintage style paper Dear customers!If you have ANY questions, (PLEASE ASK us) Our Benefits:Easy to build beautiful clock – we offer housingA special socket for each pin IN-18 – Easy to change tubes Easy to customize firmware under Your own needs, thanks to an open platform – Arduino®.Fast uploading via USBThe latest version of the firmware always available on GitHubNo need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menuVery high quality of Printed Circuit BoardsJapan aluminum capacitorsPower-On Self-TestTechnical support Software Features: Shield support 6 IN-18 Nixie tubes [hh:mm:ss] Full static display mode Slot Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino® IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) with Backup battery 3 buttons on board to control Potenciometer to adjust High Voltage IR receiver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shield NCS318 PCB size: 264 mm x 90 mm x 53 mm IN-18 NCS318 Shield Nixie Tubes Clock: Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standard shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zealand:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zealand:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zealand:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read more