IN-4 Nixie Tubes Clock Black board with Sockets Nixie Tubes Clock on a Clear Acrylic StandUPS Express delivery is highly recommended Economy Shipping can be very slow and unreliable Nixie Tubes Clock on Acrylic Stand in Black BoardsDesigned for 6 IN-4 xUSSR Nixie Tubes with SocketsIN-4 Tubes are one of the most beautiful mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesNixie features Sockets options include Tubes, Power SupplyPlugable Accessories include compact external Temperature sensorNixie Clock is fully compatible with Arduino platform program codesIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH IN-4 Nixie Tubes Clock Black board with Sockets on Acrylic Stand: Listing includes: Nixie Tubes Clock on Acrylic Stand with Sockets (NCT404+NCM109 Boards)IN-4 Nixie Tubes – 6 pcs Set (optional, choose in selector)Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)User Manual on Vintage style paper Nixie Board features Sockets for Nixie TubesTemperature sensor with jack 3.5 mm is optional for the ClockAcrylic Stand is included with the ClockPower Supply is optional for the Clock Nixie Clock support usage of basic Accessory – Temperature sensor *The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8-2, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s). **4 tubes clock available only on IN-18 (NCT218 boards), ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M series (NCT566 boards) Dear customers!If you have ANY questions, (PLEASE ASK us). Our Benefits: All our Nixie Tubes Clocks are using HV5122PJ chips,it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1We offer flexible Tubes Boards platform, that support many Nixie Tubes(out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes)It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our ClocksFast uploading pf the Firmware via USB to the Control BoardAll the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channelNo need for additional drivers, we are using only genuine USB-to-serial converters (FTDI),drivers for them are pre-installed in all popular OSes: Windows, MacOS, LinuxIt is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platformWe use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic)Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes ClockOur Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use,Firmware version can be seen at the end of the POST testOur Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failuresWe provide competent technical support for all our products Software Features: Clock support IN-4 Nixie Tubes (6 Tubes [HH:MM:SS] or 4 Tubes [HH:MM] format).Date format: 4 Tubes [DD:MM]; 6 Tubes [DD:MM:YY]; 12/24 hour mode.Slot Machine (Anti poisoning – tubes saving function. Increases the service life).Unique RGB LED backlight with 16,7 million colors. Your can choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!Switching on/off LED backlight in the matter of seconds.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily to change it (included songs: Mission Impossible, We Wish You…).Easy updating firmware via USB using Arduino IDE.Software based on Arduino Sketch, so MCU has Arduino bootloader within.Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end. Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure. Hardware Features: Integrated High Voltage Power supply 150 – 220V.ICSP connector for flashing Arduino Bootloader to blank MCU.3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (please check the manual).Test points for testing, adjust and control low and high voltage circuits.Pads for internal buttons and terminals for external buttons.Pads for internal USB connector and terminals for external USB.Terminals for internal and external power connector.Terminals for external and internal buzzer.4 dots (digits separator) with independent controls for upper and lower dots.Power consumption: 12V, 360mA (Recommended: 12 VDC, not less than 1A ).NCM109 MCU board size: 100 x 50mm (world’s smallest dimension).NCT404 Tubes board size: 243 mm x 50 mm x 20 mm. IN-4 Nixie Clock Black Board with Sockets on Acrylic Stand by GRA & AFCH User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standard shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zealand:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zealand:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zealand:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read moreIN-18 Nixie Tube Clock Wooden Case 12/24H Slot Machine FREE Shipping 3-5 Days 4 horas ago
IN-18 Nixie Tubes Clock in a Vintage Wooden Case with Columns and Sockets UPS Express delivery is highly recommended Economy Shipping can be very slow and unreliable Model “Divergence Meter”Nixie Clock in Vintage Wooden Case with ColumnsDesigned for 6 IN-18 xUSSR Nixie Tubes with SocketsIN-18 Tubes are one of the biggest mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesExternal Temperature sensor with 3.5 mm jack included with the ClockPlugable Accessories include compact external Temperature sensorNixie Clock is fully compatible with Arduino platform program codesIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH Listing includes: Nixie Clock in Wooden Case with Columns and SocketsTemperature sensor (DS18B20) (included, external with jack 3.5)Power Supply (12V, 1A) (US, EU, UK, AU) (included, optional AC plug)User Manual on a Vintage style paper Temperature sensor is included with the ClockPower Supply is included with the Clock Dear customers!If you have ANY questions, PLEASE ASK us Main Features: Clock uses the biggest Nixie Tubest IN-18 – 6 pcs.Date format: [DD:MM:YY]; 12/24 hour format: [HH:MM:SS].Slot Machine (Anti poisoning – tubes saving function. Increases the service life).Unique RGB LED backlight with 16,7 million colors. Possible to choose any constant color off backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!Switching on/off LED backlight in the matter of seconds.As alarm sound clock uses standard RTTTL (Nokia format) melodies, so you can easily change it (included songs: Mission Impossible, We Wish You…).Easy updating firmware via USB using Arduino IDE.Software based on Arduino Sketch, so MCU has Arduino bootloader within.Power On Self-Test (POST): LED backlight, tubes and sound. You can check firmware version at the end.Unique detailed tube test – our soft check each segment on every lamp. Distinguishable to see segment failure.High quality PCB and components. We use Japanese aluminum capacitors only (Nichicon, Panasonic).Clock use 12 V/1 A Power Supply INCLUDED in package. Working on 100 – 240 VAC input.You can choose between: US, EU, UK, AU plug.Dimensions: 340 mm x 90 mm x 112 mm (13.4in x 3.54in x 4.4in) Our Benefits: A special Socket for each pin of IN-18 – easy to change Tubes.Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USB.The latest version of the firmware always available on GitHub.No need to download drivers – we are use only Genuine USB to serial converters (FTDI FT230).Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menu.Very high qualty of Printed Circuit Boards.Japan alluminium capacitors.Power-On Self-Test.Competent Technical support. Vintage style Wooden Case for IN-18 Nixie Tubes Clocks All of our Wooden Cases are handmade and produced by the craftsman from our own team.He is experienced carpenter and have a longstanding work with wood of over 30 years.We use a maple, alder and oak for our Wooden Cases.We approach to process of preparing the material with big responsibility.This process includes scrupulous selection, drying in at indoor temperature of about 25 celsius for a 60 days.Some other craftsman use fast drying in special chambers for only 8 days but are not.Long drying gives better material quality.Then all the details are made on the joinery machines.And then final crafting is done with tools individually so each detail is a handmade.Then comes the varnish coating in four stages during next 14 days.This gives the best result in coating of every detail.Also it is worth mentioning that all decorative plates of the Cases are made of Stainless Steel with laser engraving.All the control buttons and switches of the Cases are also made of stainless steel. IN-18 Nixie Tubes Clock Divergence Meter by GRA & AFCH: IN-18 Nixie Tubes Clocks Wooden Case Redesigned Back Panel: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shaipments are paid by the buyerNo restocking fees are charged
Read moreKIT IN-14 Arduino Shield NCS314 Nixie Clock WITH TUBES FREE SHIPPING 6 horas ago
DIY KIT IN-14 Arduino Shield Nixie Tubes Clock Shield for Arduino UNO/ MEGA NCS314 HW v2.2We provide FREE WORLDWIDE Economy shipping UPS Expedited delivery 3-5 days available DIY KIT for IN-14 Shield Nixie Clock with ColumnsDeveloped for 6 IN-14 xUSSR Nixie TubesIN-14 Tubes are one of the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesDIY KIT developed for Tubes Shield Board and Control Arduino BoardOptions include Tubes, Columns, Arduino and Power SupplyDIY KIT is made for Arduino UNO and MEGA 2560 Control BoardsIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH Example of assembled Shield NCS314 Board: Listing includes:Tubes Shield (NCS314 v2.2) Bare PCBIN-14 Nixie Tubes – 6 pcsSet of Electronic Parts and Components for Shield (NCS314 v2.2) BoardSet of Screws and Spacers for Shield and Arduino BoardsPrincipal Electrical Scheme on paperBOM List for Shield (NCS314 v2.2) BoardUser Manual on a Vintage style paper The base listing contains only BARE PCB and full set of electronics partsWithout Arduino, Columns and Power SupplyListing includes bare PCB to make Shield NCS314 with soldered IN-14 Nixie Tubes This listing does NOT contain the Arduino board and power supply We are selling already flashed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951Flashed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626Power supplies: www.ebay.com/itm/162367596648Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779Glass Column: www.ebay.com/itm/162276387248GPS Receiver GA-6: https://www.ebay.com/itm/162682147400IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139 …And upload software into your arduino Link to (software) github.com/afch/NixeTubesShieldNCS314 Link to (video tutorial) Our Benefits: Easy to build beautiful clock – we offer housing Easy to customize firmware under Your own needs, thanks to an open platform – Arduino. Fast uploading via USB The latest version of the firmware always available on GitHub No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux. Human friendly menu Very high qualty of Printed Circuit Boards Japan alluminium capacitors Power-On Self-Test Technical support Dear customers!If you have ANY questions, PLEASE ASK us Software Features: Shiled support 6 IN-14 Nixie tubes [hh:mm:ss] Full static display mode Slote Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) High precision time chip DS3231 with Backup battery Acquiring time via external GPS module (only with Arduino Mega) 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 12V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) Shields comparison table: https://youtu.be/58xMATPCJ-I https://youtu.be/FMEhx8zmo_0 IN-14 Arduino Shield NCS314 v2.2 Electrical Scheme: Actual photos of the Shield NCS314 DIY KIT:Arduino Nixie Tubes Clock Shield NCS314 Top ViewArduino Nixie Tubes Clock Shield NCS314 bottom View Board dimensions in 2D and 3D Nixie Tubes Clock Shield for Arduino NCS314: This is example of assembled Shield Board NCS314 The base listing contains only BARE PCB and full set of electronics parts (Arduino, Columns and Power Supply are not included) User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read moreArduino Shield IN-14 NCS314 Nixie Tubes Clock [TUBES COLUMNS MEGA] FREE SHIPPING 9 horas ago
IN-14 Arduino Shield NCS314 Nixie Clock with Columns and Arduino MEGA 2560 FREE WORLDWIDE Economy shipping UPS Expedited delivery 3-5 days available Project “Divergence Meter mini”Arduino Shield Nixie Tubes Clock with ColumnsDesigned for 6 IN-14 xUSSR Nixie Tubes with SocketsIN-14 Tubes are the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesShield options include Tubes, Columns, Sockets and Power SupplyAccessories include Temp. sensor, GPS Receiver, IR RemoteShield Clock is designed for Arduino UNO and MEGA 2560 BoardsIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH Listing includes: Shield Tubes Clock (NCS314 Shield)IN-14 Nixie Tubes – 6 pcs SetColumns with Dots – 2 pcsArduino Control Board (MEGA 2560)User Manual on Vintage style paper Columns with separating Dots are included for the ClockArduino Control Board is included for the Clock This listing does NOT contain the GPS, Remote and Power Supply All Accessories are available to buy below We are selling pre-programmed Arduino UNO here: (Uno) www.ebay.com/itm/162377278951Pre-programmed Arduino Mega here: (Mega) www.ebay.com/itm/162377285626Power supplies: www.ebay.com/itm/162367596648Glass Column with dots:www.ebay.com/itm/162276387248GPS Receiver GA-6: https://www.ebay.com/itm/162682147400IR Remote Controller RM-X153: https://www.ebay.com/itm/162682141139Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779Beautiful Wooden case Case WCNS314www.ebay.com/itm/162489321125 …And upload software into your arduino Link to (software) github at the «NixeTubesShieldNCS314» repository. Link to (video tutorial) link was hidden by eBay (Search on Youtube by «Cemwr_im0U4» keyword) Our Benefits: All our Nixie Tubes Clocks are using HV513WG chips,it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1We offer flexible Tubes Boards platform, that support many Nixie Tubes(out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes)It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our ClocksFast uploading pf the Firmware via USB to the Control BoardAll the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channelNo need for additional drivers, we are using only genuine USB-to-serial converters (FTDI),drivers for them are pre-installed in all popular OSes: Windows, MacOS, LinuxIt is easy to modify the Nixie Clock’s Firmware functions for your tasks due to the open Arduino platformWe use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic)Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes ClockOur Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use,Firmware version can be seen at the end of the POST testOur Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failuresWe provide competent technical support for all our products Dear customers!If you have ANY questions, (PLEASE ASK us). Software Features: Shiled support 6 IN-14 Nixie tubes [hh:mm:ss] Full static display mode Slote Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Hardware Features: Integrated High Voltage Power supply: 150 – 220V. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjusting and controlling low and high voltage circuits. Internal buzzer. RTC (Real Time Clock) with Backup battery 3 buttons on board to control Potenciometer to adjust High Voltage IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots. Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in) Shields comparison table: Arduino Nixie Tubes Clock Shield NCS314 Example of IN-14 Arduino Shield NCS314 with Columns and Arduino UNO and box: Boards Dimensions in 2D and 3D Nixie Tubes Clock Shiled for Arduino NCS314: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read moreIN-14 Nixie Tubes Clock [Tubes Columns Temp sensor Power Supply] Arduino comp. 9 horas ago
IN-14 Nixie Tubes Clock with options Tubes Columns Temp sensor Power Supply We provide FREE WORLDWIDE Economy shipping UPS Express delivery is highly recommended Project “Divergence Meter mini”Nixie Tubes Clock with Columns on White BoardDesigned for 6 IN-14 xUSSR Nixie TubesIN-14 Tubes are the most popular mass-produced Nixie TubesNixie Clocks are one of the most beautiful and popular Vintage ClocksClock features Startup Tune, RGB backlight, USB port for updatesNixie Tubes Clock options include Tubes, Columns, Power SupplyPlugable Accessories include compact external Temperature sensorNixie Clock is fully compatible with Arduino platform program codesIt allows you to write your own uniqe programs for the Arduino platformAll the latest Source codes are always available on our GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH Listing includes: Nixie Tubes Clock (NCT414+NCM109 Boards)IN-14 Nixie Tubes – 6 pcs Set (optional, choose in selector)Columns with Dots – 2 pcs (optional, choose in selector)Temperature sensor (DS18B20) (optional, external with jack 3.5 mm)Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)User Manual on Vintage style paper Columns with separating Dots are optional for the ClockTemperature sensor with jack 3.5 mm is optional for the ClockPower Supply is optional for the Clock GRA AND AFCH Nixie Clocks KEY Features: Flexible platform, that support any* Nixie Tubes (You can replace it to any our tubes board on Z573, IN-8, IN-8-2, Z5660, IN-18 or others, see our listings); Easy to assemble beautiful Nixie clock – we offer housing; Easy operation; It is easy to modify the clock’s program for your tasks, due to the open Arduino platform; Fast upload new firmware via USB; Always newest firmware on GitHub; You will not have problems with drivers on Windows and MAC, we use only the genuine FT230 USB chip; High PCB quality, Japanese aluminum capacitors (Nichicon, Panasonic); Tubes board can be easy cutted so that only 4 tubes left for [HH:MM]. (See picture below) Self-test on power-up; Technical support; *The MCU board support a variety of tubes, such: ZM1042, Z522M, Z566M, Z5220M, ZM1040, Z5660M, B566M, LC-631, IN-14, IN-18, IN-12, IN-8, IN-7, IN-1, IN-2, IN-4, IN-8-2, IN-15, IN-16, IN-17 to use this tubes You need appropriate tubes PCB(s). This lot contains Ready-to-Use Nixie Clock with Nixie Tubes and power supply: 1 pc – assembled MCU board NCM107 1 pc – assembled Tubes boards NCT414 with Nixie tubes. (You can replace it to any our tubes board on IN-18, Z5560, IN-8, IN-12 or others, see our listings) Flashed MCU with Arduino bootloader and NixieClock sketch firmware. 6 pcs – IN-14 Nixie tubes 2 pcs – IN-3 neon lamps as Dots Power supply 12V, 1A for any country (see selector on top of screen) Set of hex pillars. User manual on vintage-style paper.This LOT contains Ready-to-Use IN-14 Nixie Tubes Clock! We offer housing for our IN-14 Nixie Clocks:Acrylic Case for IN-14 Nixie Clock: https://www.ebay.com/itm/162736300779 Wooden Case for IN-14 Clock: https://www.ebay.com/itm/162147233489 Also DIY KIT for IN-14 Nixie Tubes Clock are avaliable for purchase:https://www.ebay.com/itm/162492169409 Dear customers!If you have ANY questions, (PLEASE ASK us). Software Features: Clock support many kinds of Nixie tubes (6 tubes [hh:mm:ss] format and 4 tubes [hh:mm]). 12/24 hour format. Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors. Very easy to switch LEDS off/on or set desired color. As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you). Easy updating firmware via USB using Arduino IDE. Software based on Arduino sketch, so MCU has Arduino bootloader within. Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test. Keep time counting until power off. All setting stored to non-volatile memory. Hardware Features: Integrated High Voltage Power supply 150 – 220V. ICSP connector for flashing Arduino Bootloader to blank MCU. 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual). Test points for testing, adjust and control low and high voltage circuits. Pads for internal buttons and terminals for external buttons. Pads for internal USB connector and terminals for external USB. Terminals for internal and external power connector. Terminals for external and internal buzzer. 2 dots column with separate controls upper and lower dots. Power consumption: 11-14V, 360mA (Recommended power source: voltage 12V, current 1-2A). MCU board NCM107 has world smallest size: 100mmx50mm. Tubes board NCT414 size: 200mmx50mm. Actual photos of Clock boards: Tubes board NCT414 Top view Tubes board NCT414 Bottom view Example of assembled IN-14 Nixie Tubes Clock (without case): Example of assembled IN-14 Nixie Tubes clock with Columns: Tube board dimensions: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shaipments are paid by the buyerNo restocking fees are charged
Read moreNixie Tube Clock IN-14 Arduino Shield NCS314 WITH TUBES FAST DELIVERY 3-5 Days 9 horas ago
IN-14 Arduino Shield NCS314 Nixie Clock with Tubes UPS Express delivery is highly recommended Economy Shipping very slow and unreliable The Ardrduino Nixie Tubes Shiled NCS314 allow You to make 6 digits Nixie Tubes Clock in “Divergence Meter Mini” style (by GRA & AFCH). Or You can just display any 6 digits strings on this IN-14 Nixie Tubes made in xUSSR. Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world, everyday. PCB design, schematic, housing and software made by GRA & AFCH. Nixie Clock Shield NCS314 compatible with Arduino Uno and Mega, so it allows you to write your own unique programs on the Arduino platform, the latest sources are always available on github at the «NixeTubesShieldNCS314» repository. Listing Includes: Assembled NCS314 Shield Board IN-14 Nixie Tubes – 6pcs NE-2H Neon lamps – 2pcsSet of Hex spascers and screws User manual on vintage-style paper This listing does NOT contain the Arduino Control Board, GPS, Remote and Power Supply All of these Components and Accessories available to buy by links below:We are selling pre-programmed Arduino UNO here: www.ebay.com/itm/165858678334Pre-programmed Arduino MEGA here: www.ebay.com/itm/162377285626Power Supplies: www.ebay.com/itm/162367596648Glass Column with dots: www.ebay.com/itm/162276387248GPS Receiver GA-6: www.ebay.com/itm/162682147400IR Remote Controller RM-X153: www.ebay.com/itm/162682141139Beautiful Acrylic Case ACNS314 v3.3 at a price of $ 34.95 www.ebay.com/itm/162736300779Beautiful Wooden case Case WCNS314: www.ebay.com/itm/162489321125 …And upload software into your Arduino Link to (software) github at the «NixeTubesShieldNCS314» repository Link to (video Tutorial) link was hidden by eBay (Search on YouTube by «Cemwr_im0U4» keyword) Dear customers!If you have ANY questions, (PLEASE ASK us) Our Benefits:Easy to build beautiful clock – we offer housingEasy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USBThe latest version of the firmware always available on GitHubNo need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menuVery high quality of Printed Circuit BoardsJapan alluminum CapacitorsPower-On Self-TestTechnical support Software Features: Shield support 6 IN-14 Nixie tubes [hh:mm:ss] Full static display mode Slot Machine (Ani poisoning) Temperature display (DS18B20) [Celsius or Fahrenheit] GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included) Operation via IR remote control (Remote control Sony RM-X151, not included) No need refresh or update information on the tubes The maximum possible brightness of the tubes 12/24 hour format Date format: DD:MM:YY Unique RGB LEDs backlight with 16,7 million colors Very easy to switch LEDS off/on As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it (included songs: mission impossible, we wish you) Easy updating firmware via USB using Arduino IDE Power On Self-Test (POST): LEDs test, tubes test, input voltage test, sound test Hardware Features: Integrated High Voltage Power supply: 150 – 220V 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual) Test points for testing, adjusting and controlling low and high voltage circuits Internal buzzer RTC (Real Time Clock) with Backup battery 3 buttons on board to control Potentiometer to adjust High Voltage IR receiver TSOP4836 for IR remote controllers (may conflict with “Tone” library) Temperature sensor DS18B20 8 pcs of RGB SMD LEDs SPI up to 4Mhz Places for 2 column with 2 neon dots inside Separate controls upper and lower dots Power consumption: 11-14V, 760mA. Recommended: 12V, 1-2A (center pin positive +) Reverse polarity protection Nixie Tubes Shield NCS314 PCB size: 200 mm x 53.34 mm (7.87 x 1.2 in) Shields comparison table: IN-14 Arduino Shield NCS314 Nixie Tubes Clock Example of IN-14 Arduino Shield NCS314 with Columns in the box: Boards dimensions in 2D and 3D IN-14 Arduino Shield Nixie Tubes Clock GRA & AFCH User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shipments are paid by the buyerNo restocking fees are charged
Read moreIN-14 Nixie Tube Clock in Wooden Case 12/24H Slot Machine FREE SHIPPING 3-5 Days 13 horas ago
IN-14 Nixie Tubes Clock Divergence Meter mini Note: UPS Express delivery is highly recommended Economy Shipping can be very slow and unreliable Model “Divergence Meter mini”Nixie Clock in a Vintage Wooden CaseDeveloped for 6 IN-14 xUSSR Nixie TubesIN-14 Nixie Tubes are one of the most beautiful and popular Nixie TubesClock is compatible with Arduino UNO and MEGA so it allows you to write your own programs for Arduino platformAll the latest source codes are always available on our Afch GitHub channelPCB, Design, Schematics, Case and Software made by GRA & AFCH IN-14 Nixie Tubes Clock in a Vintage Wooden Case Divergence Meter mini Listing includes:Nixie Clock in Wooden Case with Columns Power Supply for all regions: US, EU, UK or AUUser manual on vintage-style paper Power Supply is included with the Clock Our Benefits:A special Socket for each pin IN-14 – easy to change TubesEasy to customize firmware under Your own needs, thanks to an open platform – Arduino.Fast uploading via USBThe latest version of the firmware always available on GitHubNo need to download drivers – we are use only Genuine USB to serial converters (FTDI FT230). Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.Human friendly menuVery high qualty of Printed Circuit BoardsJapan alluminium capacitorsPower-On Self-TestTechnical support Dear custumers! If you have ANY questions, PLEASE ASK us Main Features:6 digits IN-14 Nixie Tubes [hh:mm:ss]12/24 hour formatDate format: DD:MM:YYSlot Machine (Anti poisoning – Tubes saving function. Increases the service life)Highly Accurate RTC (Real Time Clock) DS3231SN with Backup batteryAutomatic update information on the TubesUnique RGB LED backlight with 16,7 million colorsYou can choose any constant color of backlight LED and memorize it. Or you have option for a cyclic full spectrum color change!Switching on/off LED backlight in the matter of secondsAs alarm sound Clock uses standard RTTTL (Nokia format) melodies, so you can easy change it. (included songs: Mission Impossible, We Wish You…).Easy updating firmware via USB using Arduino IDEPower On Self-Test (POST): LED backlight, Tubes and sound. You can check firmware version at the end. Unique detailed Tube test – our soft check each segment on every Tube. Distinguishable to see segment failurePower consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, no less than 1APower Supplies for all regions: US, EU, UK and AUNixie Clock dimensions: 248(L) x 90(H) x 70(W) mm Vintage style Nixie Tubes Clock Wooden Case: All of our Wooden Cases are handmade and produced by the craftsman from our own team He is experienced carpenter and have a longstanding work with wood of over 30 years We use a maple, alder and oak for our Wooden Cases We approach to process of preparing the material with big responsibility This process includes scrupulous selection, drying in at indoor temperature of about 25 celsius for a 60 days Some other craftsman use fast drying in special chambers for only 8 days but are not Long drying gives better material quality Then all the details are made on the joinery machines And then final crafting is done with tools individually so each detail is a handmade Then comes the varnish coating in four stages during next 14 days This gives the best result in coating of every detail Also it is worth mentioning that all decorative plates of the Cases are made of Stainless Steel with laser engraving All the control buttons and switches of the Cases are also made of stainless steel. IN-14 Nixie Tubes Clock Divergence Meter mini by GRA & AFCH: User Manual Dear customers!If you have ANY questions, PLEASE ASK us Shipping and Return information All Items are shipped from UkraineVia International registered AirmailShipments are made within 1 business dayAfter the payments are received and verifiedIt takes about 4-7 days via UPS Express deliveryIt takes about 10-18 days via Standerd shippingIt takes about 35-45 days via Economy shippingWe combine multiple Items to save on shipping UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days Return PolicyAll Returns are acceptedFor Return you should contact Us within 14 Days after receiving the ItemRefunds are made as Money back or Replacements (buyer’s choice)Return Shaipments are paid by the buyerNo restocking fees are charged Dear custumers! If you have ANY questions, PLEASE ASK us
Read more